This security walkthrough metal detector is designed to detect both ferrous and non-ferrous metals, allowing identification of a wide range of metallic items, including knives, guns, and non-iron-containing materials.

The sensitivity required to detect different masses will vary depending on the composition of the metal. Ferrous metals are easier to detect that non-ferrous which means that if your target is a non-ferrous item, you should increase the sensitivity level.

This high-sensitivity walkthrough metal detector gate has 18 independent detection areas, providing precise localization of detected items on the user’s body. The lights will activate on either side of the device showing where a detection has occurred. The lights will correspond to the location of the detection.

Yes, the RISK W2 offers 255 adjustable sensitivity levels, allowing operators to fine-tune detection for targeted search profiles, ensuring optimal screening accuracy.

An example of this function is where, depending on your search profile, you might want to lower the sensitivity around the head and neck to avoid false alarms caused by jewellery if you are looking for items that can’t be kept there.

The RISK W2 is not a portable walkthrough metal detector gate. Traditionally, this would mean that it is collapsable or has a modular construction, the RISK W2 has neither. It is however much lighter than many of its competitors and does come with a set of wheels that allows you to move it around a location. It does not have a battery and is designed for indoor use only. It is also not recommended to constantly build and unbuild it regularly. It should be used as a fixed position device.

When a person walks through a security metal detector gate, the infra-red beams clock their movement as an individual instance. If the reset speed of the device is not fast enough then a second person comes through, it will not try and detect again, assuming that it is the same person. The RISK W2 Walkthrough metal Detector resets in less than a second, enabling rapid screening of over 60 individuals per minute, ideal for high-traffic areas requiring swift and thorough security checks.

This security walk through metal detector is easy to assemble and use. Assembly does not require any tools or specialist training as everything needed is provided with the device. It does not require ongoing maintenance or servicing and all of its functionality can be controlled the convenient touch screen LCD interface.

The intuitive 7” LCD display allows seamless navigation through various configurable options, including application presets, sensitivity settings, alarm types, and more.

While precautions should always be taken to limit physical access to essential security equipment, there RISK W2 does include built-in tamper protection. The control panel has an encrypted password lock that prevents access to unauthorised personnel. You can change the password as required from the default.

There are four separate counts taken by this walk through metal detector gate. It categorises them into two categories, successful passes and alerts. It then measures the number of passes in each direction. This means that you can use the device to work out how many people entered a building and left as well as how frequent searches occur vs expectation. This allows you to then adjust your search profile accordingly.

No, the RISK W2 walkthrough metal detector is not meant for outdoor use. As a fixed position the RISK W2 is designed for indoor use with an IP22 rating, ensuring reliable performance without direct exposure to rain or precipitation.

No, the RISK W2 is specifically designed to detect metallic objects and does not have the capability to identify non-metallic items or substances.

The RISK W2’s rapid reset feature allows for swift screening of over 60 individuals per minute while maintaining precise detection accuracy, ensuring efficient throughput.

portable metal detector arch has wheels at the bottom that allow it to be pulled along like a trolley. It’s deconstructed dimensions are 88.9cm x 60.6cm x 48.4cm for convenient mobility.

The 18 independent detection areas enable precise identification of the location on an individual’s body where a detected item is situated, allowing focused and targeted searches.

search profiles.

Yes, the RISK W2 meets various safety standards, including EN60950, EN50081-1, EN50082-1, GB15210-2003, IS09001:2008, 0HSASl 8001, ISO14001, FCC, and ROHS certifications.

Constructed primarily from aluminum, the RISK W2 exhibits robust durability, ensuring longevity and resilience in various operational environments.

Yes, the RISK W2 Walk Through Metal Detector is covered by a 12-month warranty that encompasses manufacturing defects, ensuring confidence in its reliability.

Absolutely, with 255 adjustable sensitivity levels and configurable settings, the RISK W2 can be tailored to suit various security requirements and target-specific threats.

While formal training is not mandatory, familiarizing oneself with the user manual is advisable to ensure optimal usage and understanding of the device’s functionalities.

The RISK W2 requires minimal regular maintenance, functioning similarly to standard electronic equipment. Following provided care instructions ensures extended operational lifespan.

No, the RISK W2 operates using low-powered electromagnetic fields, devoid of harmful radiation such as x-rays or ultrasonic waves, ensuring safety for operators and individuals passing through.

You do not need to download any software to use the RISK W2 walk through metal detector. Once fully setup, you can use the 7” LCD display screen to configurate and change any settings.

The RISK W2 security walk through metal detector is utilized by police forces, security companies, arenas, educational institutions, government and public buildings and local organizations.

Yes, this walk through metal detector is fully supported by the RISK technical support team which are available Monday – Friday, from 9 am – 5 pm.